Price of a home automation installation

This article was machine-translated from French and is being reviewed. Prices are in Algerian dinars excl. VAT.

What budget should be planned for moving to domotics? There is no single price: the total depends on the number of points, the state of the electrical installation and Wi‑Fi. This guide gives what we can establish: store prices, some material cost examples, and labour reference points from our quotes. All amounts are in dinars, excl. VAT.

In short

  • Material: store prices as of 06/11/2026 are known. A Sonoff MINI Extreme R4 module is listed at 2,900 DA HT, a TTLock GL5T lock at 34,000 DA HT, a TTLock S7‑BLE controller at 13,500 DA HT.
  • Installation: our quotes give only line references (travel, configuration, commissioning). Totals for a complete installation are set on the quote after a visit.
  • The wiring in 230 V boxes is reserved for a qualified electrician: budget it accordingly.

What is included in the price

A domotic installation adds several items:

  1. The material: modules, lamps, locks, controllers, cards.
  2. The supplies: cables, mounting boxes, power supplies, connectors.
  3. Installation by an electrician, including neutral check in boxes and circuit protection.
  4. Configuration and commissioning: pairing, accounts, scenarios, testing.
  5. Travel, depending on the address.
  6. The Wi‑Fi network and backup power, if coverage or outages require it.
  7. Maintenance, if you outsource it.

Store prices as of 06/11/2026

Excl. VAT store prices from asloitech.com as of 06/11/2026, subject to availability.

The sale unit of the Mifare card (per piece or per box of 200) must be confirmed before ordering.

Observations on our quotes

These figures are rough estimates observed on our confirmed quotes, excluding tax. They do not represent a price. The ranges come from projects of very different sizes.

Quote lineOrdersPrice excl. VAT (DA): minimum / median / maximum
Sonoff MINI Extreme R47 (22 units)2 800 à 2 900
AL135NC electric latch65 445 / 8 500 / 8 500
12 V 5 A power supply for access control184 900 / 5 900 / 9 000
Backup 12 V 3 A with battery108 000 / 8 800 / 11 000
Travel and intervention271 500 / 4 500 / 18 000
Travel and installation45 100 / 17 500 / 30 000
Configuration and commissioning51 500 / 12 000 / 40 000
Installation, configuration and commissioning (generic line)151 500 / 12 000 / 240 000

Two other Sonoff lines appear in our quotes: the 2‑way DUAL R3 LITE model at 5,800 DA HT, and a no‑neutral model at 4,300 DA HT. Neither is sold in the shop. The last line of the table varies greatly by site. AsloTech studies KNX projects on quote; they are not listed here and we do not publish a price range.

Examples of material calculation

Each total below is the equipment subtotal excluding tax. It contains neither installation, travel, nor supplies.

Scenario 1: connected lighting of 3 points

Three lighting circuits with neutral wire in the boxes, each fitted with a Sonoff MINI Extreme R4 module.

  • 3 modules: 3 × 2,900 = 8,700 DA HT.

Not included: the Wi‑Fi router or repeater, presence and light sensors. Their price depends on the chosen model and is set in a quote. Read connected lighting and sockets for installation conditions.

Scenario 2: a door with TTLock S7‑BLE controller

  • S7‑BLE: 13,500 DA HT (store price).
  • Electric latch AL135NC: 8,500 DA HT (median of our quotes).
  • 12 V 5 A power supply: 5,900 DA HT (median of our quotes).
  • Total: 13,500 + 8,500 + 5,900 = 27,900 DA HT, excluding cards, cable, exit button and installation.

With a 350 kg suction cup instead of the latch (8,500 DA HT), expect about 8,000 DA HT for the suction cup alone, or roughly 16,000 DA HT with its L‑shaped support (the shop lists 16,500 DA HT for the 350 kg ZKTECO electromagnetic lock); details are in the guide TTLock smart lockAn alternative for a frameless glass door is the GL5T lock: 34,000 DA HT of equipment, excluding any optional gateway, whose price is requested on a quote. See TTLock smart lockTo compare with wired access control, see the price of an access‑control installation for a door and the page access control and time clock.

Scenario 3: small room with lighting and access

  • 2 Sonoff MINI Extreme R4 modules: 2 × 2,900 = 5,800 DA HT.
  • 2 Moes spots on a separate circuit: 2 × 4,500 = 9,000 DA HT.
  • S7‑BLE: 13,500 DA HT.
  • Electric latch AL135NC (median of our quotes): 8,500 DA HT.
  • 12 V 5 A power supply (median of our quotes): 5,900 DA HT.
  • Total: 5,800 + 9,000 + 13,500 + 8,500 + 5,900 = 42,700 DA HT.

This total excludes air‑conditioning order, presence detector, and installation. Their price depends on the model and is set in a quote. See home automation for offices for use cases.

Labor: what we can say

We do not publish a per‑device installation rate. What our quotes show is the following:

  • The lines of movement range from 1,500 to 30,000 DA HT depending on the intervention.
  • The lines for configuration and commissioning range from 1,500 to 40,000 DA HT, with a median of 12,000 DA HT.
  • The commissioning tests and activation are part of what AsloTech offers; they are quoted on a case basis.
  • The installation of a module in an in‑wall box must be performed by a qualified electrician. Its duration depends on access to the box, the neutral and circuit protection.

To determine where your project is located, a technical visit is the only serious basis.

Factors that vary the price

  1. The number of points and the number of rooms.
  2. The neutral. A module that requires a neutral cannot be installed in a two‑wire box. Another model must be used, or the wiring must be redone.
  3. The state of the circuits. Independent circuits per zone simplify control. Mixed circuits require more electrician work.
  4. The Wi‑Fi. Insufficient coverage requires additional access points: see how many Wi‑Fi access points to plan and the page networking.
  5. The technology. A KNX bus requires a study, cable and programming: see wireless home automation or KNX. We do not publish a range to compare it with wireless.
  6. The distance from our two stores, in Mohammadia and Birtouta.
  7. The integration with CCTV, alarm or access control.

What the price does not always include

  • The backup power supply. If outages are frequent, a UPS keeps the router running. A model from the store, the EAST EA265 Pro 650 VA / 390 W, is listed at 10,500 DA HT. Check the power of what you plug in: see UPS: how to choose the power.
  • Electrical work, if circuits need to be redone or added.
  • Supplies: cables, connectors, suitable in‑wall boxes.
  • Maintenance: application updates, sensor battery replacement, account management. See preventive or corrective maintenance.

How to control the budget

  1. Start with a pilot circuit and test it before expanding.
  2. Have the neutral checked during a visit, before ordering modules.
  3. Reuse existing Wi‑Fi if coverage is good at the module locations.
  4. Group interventions: one trip for several points costs less than multiple visits.
  5. Do not do the 230 V wiring yourself. A connection error is a risk to people and the building.

Custom quote

For an accurate quote:

  1. Contact us from the page connected home automation and building.
  2. Describe: area, affected rooms, desired functions, condition of in‑wall boxes, existing Wi‑Fi, local power outages.
  3. Schedule a technical visit: it is the one that allows you to estimate the installation cost.

Also check connected lighting and sockets and wireless home automation or KNX to refine your project. Browse the audiovisual and home automation shop for current stock and prices.

Frequently asked questions

Can we start with a small budget?

Yes. The cheapest Wi‑Fi module in the shop for ordering a lighting circuit is listed at 2,900 DA HT (Sonoff MINI Extreme R4, as of 06/11/2026, subject to availability). Add the installation by an electrician and, if needed, Wi‑Fi. A pilot circuit spreads the costs.

Is a home automation installation amortised by energy savings?

We cannot confirm that: we have no measurements to cite. Savings depend on usage, building and settings. Measure consumption before and after on a pilot circuit before generalising.

Do we need to call a technician for every addition?

It depends on the addition. A device that plugs into a socket, like a connected outlet, is added in the app. A module to be housed in a 230 V box requires an electrician. Card access adds a latch and power, thus wiring.

Does a bad installation cost much to correct?

It depends on the error. A module bought without checking the neutral is replaced, costing another module and a new intervention. A poorly protected circuit or an undersized load is corrected by an electrician. That is why the pre‑order visit avoids most rework.

Need an opinion on your site? A technician can come to assess your needs and advise you.

See the Connected Building and Home Automation page

Also read

AT

AsloTech Team

Certified low‑voltage installer in Algiers.

A project or a question?

We schedule a technical visit, then give you a detailed quote.

Quote: commercial@aslotech-dz.com
Questions: contact@aslotech-dz.com